”
Characteristics
1. Medium frequency induction heating power supply, worktable, induction coil, feeding mechanism, infrared thermometer, etc.;
2 , ultra-small size, movable, covering only 0.6 square meters, convenient for use with any equipment, installation, commissioning and operation Very convenient, one will meet;
Application range
● Suitable for heating copper rods, iron rods and aluminum rods ;
● Continuous heating of round bars, square materials or other shapes of wool and other materials ;
●The whole material can be heated or partially heated, such as end heating, heating in the middle part, etc.
Device parameters
● Workbench + heating sensor + feeding mechanism + heating power + compensation capacitor box;
● According to different application requirements, it may also include infrared thermometer, temperature controller and feeding, coiling and other devices;
● Can be customized according to your needs.
Equipment advantage
● Ultra-small size, movable, covering only 0.6 square meters.
● Convenient for use with any forging and rolling equipment and robots;
●It is very convenient to install, debug and operate.
● It can be heated to the required temperature in a very short time, greatly reducing metal oxidation, saving material and improving forging quality;
● available 24 hours a day, is heated uniformly, and more rapid;
● Environmental protection, comply with environmental protection requirements, and avoid the troubles of environmental inspection;
● Power saving, compared with thyristor intermediate frequency, not only small size, easy maintenance, but also saves 15-20% .
● It is convenient to replace the furnace body to meet the different requirements of the overall heating or end heating of the bar;
Forging furnace specifications and heating capacity
Model / Specification | power | Heating ability of common materials Heat steel and stainless steel to 1100 °C to heat brass to 700 °C |
SDZ -25 forging furnace | 25KW | Suitable for bar heating of Φ 12-30mm |
SDZ- 35 forging furnace | 35KW | |
SDZ- 45 forging furnace | 45KW | |
SDZ- 70 forging furnace | 70KW | Suitable for bar heating of Φ 15-50mm |
SDZ- 90 forging furnace | 90KW | |
SDZ- 110 forging furnace | 110KW | |
SDZ- 160 forging furnace | 160KW | Suitable for bar heating of Φ 15-90mm |
SDZ- 200 forging furnace | 200KW | |
SDZ- 250 forging furnace | 250KW | Suitable for bar heating of Φ 30-150mm |