Classic line ordinary parallel 0.25 ton induction melting furnace
Power selection: 0.25 ton induction melting furnace 0.25 ton smelting furnace power range is generally 200-250KW; frequency range 1000Hz; according to different tonnage and different process requirements, select the appropriate melting power to achieve the best efficiency ratio.
I. 0.25 ton intermediate frequency furnace configuration and quotation:
Medium frequency melting furnace model GWT-0.25 / 250 | 250KW intermediate frequency melting furnace configuration | 200KW intermediate frequency melting furnace configuration |
IF melting furnace Rated power | 250KW KGPS IF Power Supply | 200KW KGPS IF Power Supply |
Frequency melting furnace intake phase voltage | 3 * 380V | 3 * 380V |
Rated voltage of intermediate frequency melting furnace | 1500V | 1500V |
IF melting furnace type rated capacity | 0.25T | 0.25T |
IF melting furnace Rated temperature | 1600 ℃ | 1600 ℃ |
With KGPS intermediate frequency power supply specifications | KGPS-0.5 / 250 | KGPS-0.5 / 200 |
Configuration sheet of intermediate frequency melting furnace : | Fast KGPS IF Power | set |
Inverter compensation capacitor cabinet | set | |
IF furnace body | Ertai | |
IF Furnace Reducer | Ertai | |
Water-cooled cable | Two | |
Crucible film | One | |
Manual information | One |
Second, the classic line ordinary 0.25 ton induction melting furnace configuration instructions: A, IF power and electrical parts: IF power, compensation capacitors and control cabinets. B. Furnace part: Equipped with two aluminum shell furnace bodies, one for production use and the other for backup; the furnace body includes furnace shell, inductor, crucible, furnace body support, reducer, water distributor, etc. C. Connection materials: a set of copper bars from the power supply to the capacitor cabinet; a set of water-cooled cables (capacitor cabinet to the furnace body) Note: The above configuration is a standard configuration of a typical "one electric two furnaces", we can according to different production process requirements Provide configuration schemes that meet production needs.
Third, cooling equipment: users can choose a better cooling method according to the actual situation on site. Generally, the first consideration is to use a fully enclosed cooling tower and install soft water to effectively reduce the failure rate of the equipment. If the site water quality is good, the site is large, and the dustproof measures are appropriate, consider constructing a pool.
Fourth, equipment characteristics: Zero-voltage frequency sweep software startup, startup success rate of 200%. Comprehensive protection measures, such as overcurrent, overpressure, current limiting, pressure limiting, lack of water, lack of equal protection, make the equipment operate reliably under the premise of ensuring the melting speed.
(1) The equipment is small in size, light in weight, high in efficiency and low in power consumption. (2) The temperature around the furnace is low, there is less smoke and dust, and the working environment is good. (3) The operation process is simple and the melting operation is reliable; it is suitable for various metal melting and various casting processes. (4) The metal composition is uniform and the material is well controlled. (5) Fast melting and heating, easy control of furnace temperature and high production efficiency.(6) The furnace has a high utilization rate and convenient replacement of varieties.
