Why is the induction melting furnace selling well ? The technical standards tell the answer!

A, the overall quality requirements for induction melting furnace production

1. The overall quality of the induction melting furnace is implemented in accordance with the quality requirements of exporting advanced national electrical products.

2. The manufacturer shall install the fixed electrical components in strict accordance with the technical requirements of the drawings, and select the electrical materials according to the drawings. The manufacturer shall provide the relevant materials and samples of the brands and model specifications of the materials used. The manufacturer's technical quality inspectors confirm that they can use them.

3. Do not use fake brand name and poor quality components and materials. Wires must use "quality national standard" plastic stranded copper wire.  

B, special quality requirements

1. For medium-frequency power cabinet door locks (link type) and hinges, choose a brand with good quality (samples provided by the manufacturer).  

2, the door connection line uses a special wire protection sleeve to reduce the damage of the wire and the pressure to close the door.  

3. The component guide rail is made of aluminum alloy, and the cutting is neat and burr-free.  

4. The wiring trough is made of high-quality materials, which can not be damaged or damaged. The cutting is neat and burr-free, and the butt joints are tight.  

5. The bottom of the distribution box is made of high-quality cable clamps. The size and position of the opening at the bottom of the box are made according to the picture.  

6. The production of the distribution box pay attention to the material thickness of the board, the surface treatment before the spraying, and the quality of the plastic powder. All the holes in the cabinet are opened by the CNC punching machine, and the cabinet and the cabinet door are tight without deformation. The surface of the cabinet is smooth and smooth without scratches.  

7. Wiring and component layout are neat and tidy; small accessories such as terminal block bracket, wire nose, numbering tube (numbering machine), color standard, component label, etc. are complete and neatly arranged.  

8. Other unspecified parts are implemented in accordance with the “Total Quality Requirements”.  

C, consistency requirements for shaped induction melting furnace

1. Medium frequency power cabinet processing: plate thickness, structural size, opening position size, plastic powder brand and color specifications cannot be changed at will.  

2, the main auxiliary materials: brand specifications of all components; wire brand model, specification color; accessories (winding pipe, tie bar, wire nose, wire number, signs, fastening screws, etc.) brand, specifications and colors are not available Feel free to change.  

3. Wiring production: The arrangement position and installation dimensions of the components should be consistent; the wiring drawing; the winding and binding method and position of the bobbin and the tie bar; the color and font size of the signboard paste position should be the same.  

4. The parts of the induction melting furnace should be unified.