1 , the SD Z- 160kw copper IF furnace main components: 

(1) the SD the Z 160.- frequency power supply 
(2) and the compensation capacitor stage forging furnace 
(3) the induction coil, and the cover rail 
(4) Pneumatic feed mechanism 
(5) Infrared temperature measurement and temperature control; 
(6) Discharge ramp mechanism; 
2 , Maximum input power: 160KW 
3 , Output oscillation frequency: 1-20KHZ 
4 , Input voltage: Three-phase 380V 50 or 60HZ 
5 , Load duration: 100 % 
6 , cooling water requirements: ≥ 0.2MPa, ≥ 30L / min 
7 , heating capacity ( KG /Minutes: copper to 700 °C: 8KG 
8 , table size: length 2 m × width 0.7 m × height 0.9 m 
9 , forging furnace weight: 260KG 
10 , for pure copper, brass and other rod or tube material continuous heating

SD Z- 160kw copper rod intermediate frequency heating furnace is applied to the continuous heating of Φ 12 with copper, regular round bar material, square material or other shape hair bad materials ; it is mainly used for continuous heating of the whole material.